16
Making calls
Enter a dial pause when dialling
¤
Press and hold the hash
key. A P is shown on the display
Incoming calls
An incoming call is indicated by ringing, by a display on the screen and by the flashing Talk / Handsfree
key (
/
).
Accept a call:
•
Press the Talk key
or
Accept
•
If
Auto Answer
is activated: Remove the handset from the charging cradle
•
Accept a call on the headset
Switch off ringtone:
Silence
. . . the call can be accepted for as long as it is shown on the display
Information about the caller
The caller's phone number is displayed.
If the caller's number is saved in the local directory, the name is displayed.
During a conversation
Handsfree mode
Activating/deactivating handsfree mode during a call and when establishing a connection:
¤
Press the handsfree key
Call volume
Muting the microphone
When the microphone is switched off, callers will no longer hear you.
Switch the microphone on/off during a call: Press
.
Adjust the microphone sensitivity
Adjust the microphone sensitivity for the receiver or wired headset.
Set the acoustic profile to loud surroundings:
¤
Press and
hold
the
button Use
to set the sensitivity
Save
The caller's number is sent.
Placing the handset in the charging cradle during a call:
¤
Press and hold down the handsfree key
. . . Place the handset in the charging
cradle . . . hold
for a further 2 seconds
Applies for the mode currently being used (handsfree, receiver or headset):
¤
Press
. . . use
to set the volume
Save
The setting is automatically saved after around 3 seconds, even if
Save
is not pressed.
or:
Briefly
press the Profile key
¤
. . . Use
to select
Audio Settings
OK
OK
Mic Sensitivity
OK
Use
to select
Earpiece
/
Corded headset
Use
to set the sensitivity
Save
