background image

Privacy/security

133

Deactivating the ringer temporarily for incoming calls 
and reactivating it

If you are disturbed on an important call by the phone ringing, for example, you 
can deactivate the ringer temporarily and then activate it again.

)

Press the key briefly. The ringer is deactivated.

)

Now press the key again briefly. The ringer is reactivated.

DND (Do Not Disturb)

If "Do not disturb" is activated, your telephone will not ring. The caller hears the 
busy signal or an appropriate announcement.

Enabling/disabling DND

DND

Press the 

DND

 key to activate the "Do not disturb" function.

DND

Press the lit 

DND

 key once more to deactivate the "Do not disturb" function.

or

Enabling/disabling DND via the idle menu

Select and confirm the option shown in the idle menu. The "Do not disturb" icon 
appears 

 Page 21.

or.

Select and confirm the option shown. The do not disturb icon is deleted.

On multi-line telephones (

 Page 12) you can only activate the "Do not 

disturb" function for your primary line.

You can also use the programmable key to activate the "Do not disturb" 
function during a call or deactivate it when an incoming call is being sig-
nalled.

Do not disturb on 

f

Do not disturb off 

f

Summary of Contents for OpenScape IP 35G SIP



























































































































































































































Reviews: