Unify OpenScape Desk Phone IP 55G User Manual Download Page 35

Page: 35 / 267

Applications available on your OpenScape Desk Phone IP 55G

Multi-line view

Two tabs are displayed in the telephony interface:
• "[My phone]" tab - represents the primary line or the line view of a selected line



Page 34

• "Overview" tab - configurable overview of the secondary lines



Page 25

To access: Press the "

" key.

Example:

The status icons provide information about the state of the relevant line.

Icon

Meaning

Call for the corresponding line.

Call for a line with suppressed ringtone



Page 153.

"Hold reminder" was activated



Page 104.

The line is currently not available.

The line is busy.

You are holding the line.

The line is free.

Please note also the LED displays for the line keys



Page 25.

Line status
Line name
Status icon

Labelling of
line keys



Page 25

Summary of Contents for OpenScape Desk Phone IP 55G












































































































































































































































































Search results

Summary of Contents for OpenScape Desk Phone IP 55G

Reviews:

Brands by name

Popular brands

Unify OpenScape Desk Phone IP 55G, User Manual

Search results

Summary of Contents for OpenScape Desk Phone IP 55G

Reviews:

Brands by name

Popular brands