Individual phone configuration
225
Key click
You can select here whether a tone should be heard when a key is pressed. You
can also decide whether this should apply for all keys or only those on the key-
pad. In addition, you can adjust the tone volume or disable the tone.
z
You can also configure this setting via the WBM interface
Press the key shown until the "Settings" tab is active.
Select and confirm the option shown.
if nec.
j
Enter and confirm the user password.
Select and confirm the option shown.
Select and confirm the option shown.
Setting the volume for Key click
Select and confirm the option shown.
For instance, select and confirm a medium volume setting. You can choose be-
tween the following three options:
• Low
• High
• Off (no click)
Key selection
Select and confirm the option shown.
Select and confirm if only the keys for entering characters are to be affected.
or
Select and confirm the option shown for all keys.
Select the softkey to confirm
.
Services
User
Phone
Key click
Volume
Medium
Keys
Keypad only
All keys
Save & Exit
