114
Enhanced phone functions
CTI calls
Beep on auto-answer
When you dial a number with a CTI application (e.g. Outlook) and auto-answer
is activated, the phone switches automatically to speakerphone mode. If auto-
answer is deactivated, the phone first rings and you have to press the loud-
speaker key or lift the handset in order to set up the call. This setting also defines
whether or not incoming calls are automatically accepted. If the function is ac-
tive, an alert beep sounds when a call is automatically accepted. Details regard-
ing special application are provided on
Information on the operation of the configured CTI application can be found in
the corresponding operating instructions.
z
You can also configure this setting via the WBM interface
Prerequisite:
The option was programmed by your administrator.
Press the key shown until the "Settings" tab is active.
Confirm the option shown.
if nec.
j
Enter and confirm the user password.
Select and confirm the option shown.
Select and confirm the option shown.
Select and confirm the option shown.
Select and confirm the option shown.
Select and confirm the option shown in the context menu.
Select and confirm the option shown.
Select and confirm the option shown in the context menu.
Select the softkey to confirm
.
Services
User
Configuration
Incoming calls
CTI calls
AutoAnswer
Yes
AutoAnswer beep
Yes
Save & Exit
