38
Enhanced phone functions
Enhanced phone functions
Accepting calls
Accepting calls via the headset
Prerequisite:
The headset is connected.
Headset
The LED flashes when a call is received. Press the key shown. Conduct call.
Ending the call:
Headset
Press the key shown. The key LED extinguishes
1
.
Accepting a call via a DSS key
Prerequisite:
You have configured direct station selection keys on your
telephone
T
Press the DSS key.
Speaker
The key LED lights up. You can use speakerphone mode.
or
^
Lift the handset
1
.
Accepting calls for another member of your team
If a team member does not answer a call within 15 seconds (system-
dependent), the remaining team members hear an alert tone.
In idle mode
The phone rings. "Call for" is displayed on the phone.
^
T
Lift the handset and press the flashing "Pickup" key (
Page 69). You have now
picked up the call.
or
T
Press the flashing "Pickup" key. Speakerphone mode
[1]
.
During calls
T
Press the flashing "Pickup" key.
The first party is placed on hold while you are connected to the second party.
Ending the second call and returning to the first one
Release Call
Press the key to disconnect.
1.
Pay attention to the notes on voice encryption
Make sure your headset port is set up properly
For information on the meaning of the LED displays of the DSS keys, refer
to
