manualshive.com logo in svg

Unify OpenScape Desk Phone IP 35G, User Manual, Page: 112 / 130

Share
Download
Unify OpenScape Desk Phone IP 35G User Manual Download Page 112

112

Individual phone configuration

Setting local ring tones

Selecting and configuring the call type

The ringer mode "Local ringer" is set. Different ring tone types are sent by the 
Hipath/OpenScape 4000. Not all of the following types will necessarily be used 
in your system configuration:
• Internal
• External
• Buzz
• Rollover
• Single alert
• Multiple alert
• Special 1
• Special 2
• Special 3
• Attention
• Unspecified
• US DSN-Precedence
• US DSN-Routine
• Emergency

Select the required call type and adjust to suit your requirements.

z

You can also configure the following setting via the Enter code! 

 Page 119.

Settings

Open the menu 

 Page 19.

Select and confirm the option shown.

 

if nec. 

j

Enter and confirm the user password.

 

Select and confirm the option shown.

 

Select and confirm the option shown.

 

For instance, select "Internal" and confirm the option shown.

Select the required ringer file

[

1

]

 or "pattern". You will hear the associated ringer 

melody. Confirm the current ringer file. 

User

f

Ringer?

f

Local ringers?

f

Internal?

f

ABC.wav

f

1. The phone displays the current setting

Summary of Contents for OpenScape Desk Phone IP 35G



































































































































Reviews:

No comments