Unify OpenScape Desk Phone CP400, User Manual

Page: 41 / 171

41
Programmable keys
The OpenScape Desk Phone CP400 and OpenScape Key Module 400 each have 16 keys to
which you can assign functions or numbers on two levels.
Depending on how they are programmed, you can use the keys as:
• Function keys

page 65
• Selected dialing key

page 70
• Line key

page 99
• Direct station selection (DSS) key

page 102
Your OpenScape Desk Phone CP400 and OpenScape Key Module 400 are delivered with label
strips. You can print additional labeling strips using the LabLabeling tool available on the Internet
(http: //wiki.unify.com/klt/en_V8.0/device1.htm
)
or print out labeled strips via the web interface

page 160.
The status of a function is also shown by the LED on the corresponding key.
Meaning of LED displays on function keys
Increase the number of programmable function or selected dialing keys by connecting an ad-
ditional OpenScape Key Module 400

page 17.
LED Meaning of function key
_
Off The function is deactivated.
£
LED is flas-
hing
1
1 In this manual, flashing key LEDs are identified by this icon, regardless of the flashing interval. The flashing
interval represents different statuses, which are described in detail in the corresponding sections of the ma-
nual.
Indicates the status of the function (e.g. green or red).
¤
On The function is activated (e.g. green or red).