manualshive.com logo in svg

Unify OpenScape CP700, User Manual, Page: 211 / 243

Share
Download
Unify OpenScape CP700 User Manual Download Page 211

211

Using night service

If authorized (ask relevant Administrator), you can also set phones on other 
OpenScape Business systems as night destinations.

@

Press the Main Menu key, if needed.

€

Select DISA intern.

Confirm with the Softkey. The Functions dialog opens

j

Enter the (DISA) phone number for the OpenScape Business to which the night 
destination phone is connected.

Confirm with Softkey.

j

Enter the (DISA) phone number of the phone from which you are activating/de-
activating night answering.

Confirm with the Softkey.

Activating

€

Select Night answer on.

Confirm with the Softkey. The Functions dialog opens.

j

Enter the destination number (= temporary night answer).

Confirm with the Softkey.

Deactivating

€

Select Night answer off.

Confirm with the Softkey.

DISA intern

_

Entry complete

_

Entry complete

_

Night answer on

_

Save

_

Night answer off

_

Summary of Contents for OpenScape CP700




















































































































































































































































Reviews:

No comments