Unify OpenScape CP700 User Manual Download

Page: 115 / 243

115

...

Enter code directly.
The display will show codes with relevant text.

Select and confirm.

Enter text (maximum 24 characters)



page 23.

if needed

Delete last letter.

Switch between upper-case and lower-case letters.

Insert space.

Confirm.

Deleting or viewing sent message

Press the Main Menu key, if needed.

€

Select "View sent messages".

Open using the Softkey. The Functions dialog opens.

Confirm. Text message is displayed.

Confirm. The message is deleted.

Viewing and editing received messages

Pay attention to the notes on



page 122.

The notification LED and the MWI key LED flashes red. The "Messages" option
is shown in the idle screen with relevant number.

Press the Softkey to open the Messages list.

In the Notification area under "Msg from:

the first participant who sent a mes-

sage is displayed.

Confirm.

The text message is displayed in the Notification area, e.g. "Please bring cof-
fee".

Enter message text

Send

On system phones without display, impulse or tone dial telephones, sent
text messages are saved as callback requests.

View sent messages

Message sent

Delete

Messages

Message sent

Summary of Contents for OpenScape CP700




















































































































































































































































Search results

Summary of Contents for OpenScape CP700

Reviews:

Related manuals for OpenScape CP700

Brands by name

Popular brands

Unify OpenScape CP700, User Manual

Search results

Summary of Contents for OpenScape CP700

Reviews:

Related manuals for OpenScape CP700

Brands by name

Popular brands