Unify OpenScape CP700 User Manual Download Page 114

Page: 114 / 243

114

Speaking to colleagues directly via loudspeaker

You can speak to an internal party directly using the loudspeaker on their tele-
phone.

Press the Main Menu key, if needed.

Open using the Softkey.

Open with the Softkey.

€

Select "Speaker call".

Confirm.

Enter the phone number.

Automatic connection setup/hotline

If configured, (ask relevant Administrator) after lifting the handset the connection
to an internal or external destination is automatically made.

Lift the handset.
According to the set up, the connection is made

immediately

after

a specified

time .

Sending information (message)

You can send short text messages to individuals or groups of participants.

Creating and sending messages

Press the Main Menu key, if needed.

€

Select "Send message"

Open using the Softkey. The Functions dialog opens.

Enter the internal phone number of recipient or group.

€

Select a predefined text (can be modified by Administrator)

and confirm.

Service/Settings

Service Menu

Calls

Speaker call

Respond to Speaker call



page 107.

Send message

0=Callback request

Summary of Contents for OpenScape CP700




















































































































































































































































Search results

Summary of Contents for OpenScape CP700

Reviews:

Related manuals for OpenScape CP700

Brands by name

Popular brands

Unify OpenScape CP700, User Manual

Search results

Summary of Contents for OpenScape CP700

Reviews:

Related manuals for OpenScape CP700

Brands by name

Popular brands