manualshive.com logo in svg

Unify OpenScape CP600, User Manual

Share
Download
Unify OpenScape CP600 User Manual Download Page 76

76

Using callback

You can request a callback if the individual called is busy or if nobody answers. 
This also applies to external calls via switching centers. This will save you from 
repeatedly attempting to call someone.
You receive a callback
• you receive a callback when the other party's line becomes free,
• as soon as the party who did not reply has held another conversation.

Saving a callback

Requirement:

 The line is currently busy or nobody answers.

Confirm.

Accepting a callback

An participant for whom a callback was saved is now no longer busy or has 
phoned in the meantime. Your phone now rings.

^

Lift the handset.

or

:

Press key. LED lights up.

or

Cancel the callback with the softkey. 

If configured (ask relevant Administrator), all callback requests are auto-
matically deleted overnight.

Callback

B

_

Summary of Contents for OpenScape CP600





































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands