manualshive.com logo in svg

Unify OpenScape CP400, User Manual, Page: 24 / 160

Share
Download
Unify OpenScape CP400 User Manual Download Page 24

24

Getting to know the OpenScape Desk Phone CP400

Präsenz

If the access is configured as UC user on your phone (ask administrator) and you are logged on 
to this server.The current OpenScape UC Presence state is indicated on the main menu screen 
by an icon on the left side of the screen.

To access the "Präsenz" menu, press the Abwesenheit / Anrufumleitung 

\

 key via the softkeys. 

then you will see the following menu:

The OpenScape UC Presence state can be changed from the OpenScape UC web client. Various 
state can be selected from a drop down menu.

The available OpenScape UC Presence state will be shown as following:
•

Available 

•

Unavailable 

•

Busy 

•

Anrufschutz 

•

Be Right Back 

•

In Meeting 

•

Offline 

•

Away 

If UC is not set up, you get a menu for variable call forwarding with the options: Variabel: Alle An-
rufe Variabel: Externe Anrufe Variabel: Interne Anrufe. 

Tuesday 23 May 2019

Conversations

forwarding on

Service/Einstellun-

CFNR on

Abwesenheit / Anrufumleitung

Präsenz

Erreichbar

Away

Anrufschutz

Summary of Contents for OpenScape CP400

































































































































































Reviews:

No comments