112
Other settings and functions
Applies in own OpenScape 4000 area
j
Enter internal PIN.
or
The network applies in your own and other OpenScape 4000-sys-
tems
j
Enter the 2-digit node code for your own OpenScape 4000-system (ask respon-
sible administrator).
j
#
Enter your own phone number and press the hash key.
j
#
Enter network-wide PIN and press hash key.
Dial after successful identification.
You hear the dial tone. “Please dial“ Appears in the display.
:
Press key.
or
j
Enter a phone number immediately.
Retry call forwarding after successful identification
Select and confirm.
Select and confirm. Call forwarding is active.
Switch off identification on another device
@
Select and confirm.
Select and confirm.
Redirect call forwarding?
f
Save?
l
PIN and license of service?
f
Deactivate PIN?
f
The identification is automatically switched off if the different device is not
used for several minutes.