Unify OpenScape CP400 User Manual Download Page 108

Page: 108 / 160

108

Phoning on several lines (multi-line)

Using the second phone for the manager

Requirement:

a second phone has been set up for the manager. A programmed

“Parken” function key is set up on the manager’s first and second phone.

Parking a call on the first phone

Press the programmed “Parken” function key. LED lights up.

Continuing a call on the second phone

Lift the handset.

Press the programmed “Parken” function key.

Activating/deactivating second call for the
manager

As the manager you can determine if calls for you should arrive in the secretarial
office while you are on the phone. If you are on the phone and expecting another
important call at the same time, it perhaps makes sense to switch on second
call.

Open menu



page 22.

Select and confirm.

Confirm.

Confirm

confirm.

Parken

Switch?

Zweitanruf?

Turn on?

Turn off?

Summary of Contents for OpenScape CP400

































































































































































Search results

Summary of Contents for OpenScape CP400

Reviews:

Unify OpenScape CP400, User Manual, Page: 108 / 160

Search results

Summary of Contents for OpenScape CP400

Reviews: