manualshive.com logo in svg

Unify OpenScape CP400, User Manual, Page: 102 / 160

Share
Download
Unify OpenScape CP400 User Manual Download Page 102

102

Phoning on several lines (multi-line)

Identifying the line used

If several lines are busy at the same time, you can find out which line you are 
currently speaking on.

With the programmed function key

Press the programmed “Aktuelle Leitung” function key.

Via the menu

@

Open menu 

 page 22.

Select and confirm.

Select and confirm.

The line number and line status of the line currently in use are displayed.

Alternately phoning on several lines

Requirement 1:

 The relevant administrator has determines that the lines are to 

be held during line transfer and may only be ended by hanging up the handset 
or with the disconnect key.

Requirement 2:

 You are connected to different call partners on two or more 

lines. These could be callers 

 page 93 or call recipients

 page 73.

For example, you are conducting a call on line 1. The line key of the participant 
on hold flashes slowly.

Press the slowly flashing line key 2. The first call partner is waiting on line 1.

Press the slowly flashing line key 1. The second call partner is waiting on line 2.

You can change as often as you like.

Ending connection on a line key

É

Press key. LED goes out.

or

\

Replace the handset.

Aktuelle Leitung

_

More features? 

g

f

Akt. Leitung anzeigen?

f

Line 2

£

Line 1

£

Summary of Contents for OpenScape CP400

































































































































































Reviews:

No comments