manualshive.com logo in svg

Unify OpenScape CP200, Administrator Documentation

Share
Download
Unify OpenScape CP200 Administrator Documentation Download Page 23

inbetriebnahme.fm

A31003-C1000-M101-1-76A9, 03/2016
OpenScape Desk Phone CP200/400/600, Administrator Documentation

23

   

  

  

Startup

Assembling and Installing the Phone

2.

If Power over Ethernet (PoE) is 

NOT

 supported or an OpenScape Desk Phone CP600 

phone has more than one Key Module connected:
Plug the power supply unit into the mains. Connect the plug-in power supply unit to the 

 

jack at the bottom of the phone.

3. If applicable, connect the following optional jacks:

•

 

LAN connection to PC

•

 

Headset (accessory)

2.2.5

How to Better Use LAN Network Connections 

The OpenScape Desk Phone CP400 and OpenScape Desk Phone CP600 phones provide a 
1000 Mbps Ethernet-Switch. This allows you to connect one additional network device (e. g. a 
PC) directly via the telephone to the LAN. The direct connection functionality from phone to PC 
needs to be activated by administrator first. This type of connection allows you to save one net-
work connection per switch,with the advantage of less network cables and shorter connection 
distances.

Model

Power Consumption

OpenScape Desk Phone CP200

PoE (Power Class 1)

OpenScape Desk Phone CP400

PoE (Power Class 2)

OpenScape Desk Phone CP600

1

1

If more than one Key Module is connected, a Plug-in Power Supply is required (see below).

PoE (Power Class 2)

7

The order no. for the plug-in power supply is region specific:
•

EU: C39280-Z4-C510

•

UK: C39280-Z4-C512

•

USA: C39280-Z4-C511

7

Do not use this connection for further OpenScape Desk Phone CP, 
OpenScape Desk Phone IP or OpenStage phones!

Network 
switch

PC

OpenScape Desk Phone CP400/600

Summary of Contents for OpenScape CP200


































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands