Unify OpenScape CP200 Administrator Documentation Download Page 153

Page: 153 / 321

administration.fm

A31003-C1000-M101-1-76A9, 03/2016
OpenScape Desk Phone CP200/400/600, Administrator Documentation

153

Administration

Free Programmable Keys

3.9.13

Deflect a Call

On key press, an incoming call is deflected to the specified destination.

The target destination is defined in the

Destination

parameter.

Use the Key label <key number> field to define or change the name (label) of the key.

Free Programmable Keys (FPKs) can be configured via the WBM or on the local phone. For
details regarding the different ways to configure program keys, please refer to How to Config-
ure Free Programmable Keys (FPKs).

Administration via WBM

System > Features > Program keys > Deflect

3.9.14

Shift Level

Shift the level for the programmable keys. When activated, the functions assigned to the shifted
level are available on the keys.

Use the Key label <key number> field to define or change the name (label) of the key.

Administration via WBM

System > Features > Program keys > Shift

This feature can be enabled or disabled under System > Features > Feature access
(see Section 3.7, “Feature access”).

Key.label 3

Deflect

Submit

Reset

Destination

3335

Key.label 8

Shift

Submit

Reset

Summary of Contents for OpenScape CP200


































































































































































































































































































































Search results

Summary of Contents for OpenScape CP200

Reviews:

Related manuals for OpenScape CP200

Brands by name

Popular brands

Unify OpenScape CP200, Administrator Documentation

Search results

Summary of Contents for OpenScape CP200

Reviews:

Related manuals for OpenScape CP200

Brands by name

Popular brands