manualshive.com logo in svg

Unify OpenScape CP200, Administrator Documentation, Page: 118 / 321

Share
Download
Unify OpenScape CP200 Administrator Documentation Download Page 118

Administration

 A31003-C1000-M101-1-76A9, 03/2016

118

OpenScape Desk Phone CP200/400/600, Administrator Documentation

  

  

  

administration.fm

System Settings

3.6.11

Interactive Connectivity Establishment (ICE) 

ICE arguments in the SDP are sent to negotiate media with the purpose of improving the avail-
ability of the phone to establish a media connection (audio and video) from a peer device. For 
ICE to provide this improvement both peers must support ICE.

ICE works by adding to the SDP several candidate addresses by which the peer device may 
contact the phone.

3.6.11.1

General

•

Enabled

: Lets the phone include ICE attributes in an SDP offer and provide ICE attributes 

in an SDP answer to an SDP offer that included ICE attributes for subsequent calls.

•

Update SDP allowed

: Indicates that the phone will generate an updated SDP offer/answer 

as required by the ICE standard.

•

TURN IP mapping

: The TURN server will provide an address mapping between IPv4 and 

IPv6 peer endpoints. In other case (not activated) only endpoints supporting the required 
IP family may be addressed.

Administration via WBM

System > ICE > General

Administration via Local Phone

3.6.11.2

Addressing

•

Main server

: Select 

None

, if no ICE server is used, 

STUN

 if the ICE servers are both 

STUN servers and will only return Server reflexive candidates, or 

TURN

 if the ICE servers 

are both TURN servers and will return Relayed and Server reflexive candidates.

•

Main address

: Address of the ICE server.

|

--- Administration

|

--- System 

|

--- ICE

|

--- General

|

---

Enabled

|

---

Update SDP allowed

|

---

TURN IP mapping

General

Submit

Reset

Enabled

Update SDP allowed

TURN IP mapping

Summary of Contents for OpenScape CP200


































































































































































































































































































































Reviews:

No comments