manualshive.com logo in svg

Unify OpenScape CP200, Administrator Documentation

Share
Download
Unify OpenScape CP200 Administrator Documentation Download Page 103

administration.fm

A31003-C1000-M101-1-76A9, 03/2016
OpenScape Desk Phone CP200/400/600, Administrator Documentation

103

   

  

  

Administration

System Settings

3.6.8

SIP Communication

3.6.8.1

Outbound Proxy

If this option is set to "Yes", the phone routes outbond requests to the configured proxy. The 
outbound proxy will fulfill the task of resolving the domain contained in the SIP request. If "No" 
is set, the phone will attempt to resolve the domain by itself.

If a 

Default OBP

 (Outbound Proxy checkbox) 

domain

 is set and the number or name dialed 

by the user does not provide a domain, this value will be appended to the name or number. 
Otherwise, the domain of the outbound proxy will be appended. 

Data required

•

Outbound proxy

: Determines whether an outbound proxy is used or not.

Value range: "Yes", "No"
Default: "Yes"; when System > Registration > Server type is set to "HiQ8000" (firmware 
version V3 onwards): "Yes"

•

Default OBP domain

: Alternative value for the domain that is given in the outbound re-

quest.

Administration via WBM

System > SIP interface

Administration via Local Phone

|

--- Admin

|

--- System

|

--- SIP Interface

SIP interface

Outbound proxy

Default OBP domain

SIP transport

UDP

TLS renegotiation

Secure (RFC5746)

Call transaction response timer (ms)

NoCall transaction response timer (ms)

32000

32000

Reg. backoff (seconds)

60

Submit

Reset

Connectivity check timer (seconds)

Keep alive format

Media Negotiation

Media IP Mode

0

Sequence

Single IP
IPv4

SIP connection

Persistent (SB)

Early 183 response

Summary of Contents for OpenScape CP200


































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands