Unify OpenScape Cordless IP V2 Administrator Documentation Download Page 29

Page: 29 / 114

P31003C1020M1000276A9, 01/2018
OpenScape Cordless IP V2, Administrator Documentation

Base stations

Base stations administration

Adding/Editing base stations

On this page you enter the data for a base station to be added to the DECT manager or edit the data for a base
station that is already assigned to the DECT manager.

The following information is displayed and cannot be changed:

MAC address

Hardware address of the base station. With this address the device can be uniquely identified within the Ethernet.
It cannot be changed

DECT manager

Name of DECT manager the base station belongs to. Currently always

local:

The base station belongs to the con-

figuring device.

Summary of Contents for OpenScape Cordless IP V2



















































































































Search results

Summary of Contents for OpenScape Cordless IP V2

Reviews:

Related manuals for OpenScape Cordless IP V2

Brands by name

Popular brands

Unify OpenScape Cordless IP V2, Administrator Documentation

Search results

Summary of Contents for OpenScape Cordless IP V2

Reviews:

Related manuals for OpenScape Cordless IP V2

Brands by name

Popular brands