Using a different telephone in the same way as your own
67
Using a different telephone in the same way
as your own
You can log on to another telephone belonging to the HiPath 4000 system
using a personal identification number (PIN). This also applies to telephones in
networked HiPath 4000 systems, for example at other company locations. At
the other telephone you can then
• make calls and assign the charges to cost centers,
• make calls and assign the charges to specific projects,
• check your mailbox,
• enter appointments.
Using an internal PIN, you can have your calls diverted to a telephone in the
office or department where you will be for a temporary period (call forwarding -
"follow me").
Prerequisite:
You have been assigned a PIN by your administrator. You
require an internal PIN for calls within your own HiPath 4000 system, while for
calls involving other HiPath 4000 systems in the integrated network you require
a network- wide PIN.
u
Open the system menu.
s
t
w
Select and confirm the basic service.
Either:
6
1
Enter the service code
(61 for PIN 1, 62 for PIN 2, etc.).
Or:
s
t
w
Select the menu item and confirm.
s
t
w
Select the menu item and confirm.
If you have several PINs and wish to use another one, select the other PIN.
then:
You are prompted to enter the PIN by the message "Enter station no." or "Enter
ID" on the display.
The following applies within your own HiPath 4000 system:
o
Enter your internal PIN.
The following applies within your own and another system within the inte-
grated network HiPath 4000:
o
Enter the 2-digit node ID of your own HiPath 4000 system (consult your
administrator).
o
#
Enter your own number and press the hash key.
o
#
Enter the network-wide PIN and press the hash key.
Dialing after (successful) identification:
You will hear the dial tone. The following appears on the display: "Please dial"
o
Enter a phone number.
Note:
The function must be approved for your communications system.
BASIC SERVICE
PIN / COS?
PIN 1?
