26
Bluetooth
Bluetooth
The handset is able to use Bluetooth™ to communicate wirelessly with other devices that also use this tech-
nology, e.g. to connect a Bluetooth headset or hearing aid.
The following devices can be connected:
•
A Bluetooth headset or hearing aid
It may take 5 seconds to establish a connection to the headset, whether a call is accepted using the
headset or transferred to the headset, or a call is made from the headset.
•
Up to 5 data devices (PCs, tablets or mobile phones) for the transmission of address book entries as a
vCard or for the exchange of data with the computer.
In order for telephone numbers to be used further, the area code (international and local area code)
must be saved to the telephone.
Operating Bluetooth devices
device user guides
Activating/deactivating Bluetooth mode
If the local area code is still not saved: . . . use
to enter local area code
OK
When in idle status, the activated Bluetooth mode is indicated on the handset by the
icon.
Registering Bluetooth devices
The distance between the handset in Bluetooth mode and the active Bluetooth device (headset or data
device) should not exceed 10 m.
Editing the list of known (trusted) devices
Open the list
If a device is connected, the relevant icon is shown in the display header instead of
.
Bluetooth is activated and the devices have been registered to the handset.
The headset / hearing aid has the
Headset
or
Handsfree profile
. If both profiles
are available, the handsfree profile is used to communicate.
¤
. . . use
to select
Bluetooth
OK
Activation
Change
(
= activated)
The registration of a headset overwrites a previously registered headset.
If a headset is to be registered that is already registered with a different device, this
connection must be deactivated before registering.
¤
. . . use
to select
Bluetooth
OK
Search for Headset
/
Search
Devices
OK
. . . the search starts (may take up to 30 seconds) . . . the names of found
devices are displayed . . . possible options:
Register device:
¤
Options
Trust Device
OK
. . . use
to enter the PIN
of the Bluetooth device to be registered
OK
. . . the device is
added to the list of known devices
Showing information:
¤
. . . use
to select a device, if applicable
View
. . . the device
name and device address are displayed
Repeat search:
¤
Options
Repeat Search
OK
Cancel search:
¤
Cancel
¤
. . . use
to select
Bluetooth
OK
Known Devices
OK
. . . the known
devices are listed, an icon indicates the type of device
Bluetooth
headset
Bluetooth data device
