manualshive.com logo in svg

Unify OpenScape 600, User Manual

Share
Download
Unify OpenScape 600 User Manual Download Page 85

85

Confirm.

j

Change text.

Confirm to save input.

Finishing the procedure

Confirm to leave edit.

Overview of functions

The functions are classified under the following menus:
• Destinations
• Switches
• PIN and license of service
• Calls
• more features

LED displays of saved functions

Forwarding, Forwarding in department, Forwarding MULAP, Night answer, 
Do not disturb, Telephone lock, Response text, Silent ringing, Direct ans-
wer on/off, Group call on/off, Block phone number, Call waiting released, 
Waiting tone off, Ring transfer executive/secretary, Recording, Door relea-
se on/off, Group ringing, Layer switching, Universal Call Distribution 
(Available on/off, postprocessing on/off), Night destination on/off, MULAP 
conference Released by:: Hold key

Saved function is not switched on.

Saved function is switched on.

Callback:

You have not registered a callback.

You have registered a callback.

Call number (internal), Direct station selection (DSS):

Participant not on the phone.

Participant on the phone or do-not-disturb enabled.

Flashes quickly – I am in a call, please accept.
Flashes slowly – another participant is on a call and has not yet accepted.

Call keys, general call keys, Line key, MULAP key, Assign call number:

changing

_

save

_

finishing

_

The selection of available functions depends on configuration. Consult 
your administrator if you are missing a function. The keys of the OpenSca-
pe Key Module 600 are shown below. The LED displays for the keys are 
also displayed in Favorites.

_

¤

_

¤

_

¤

£

Summary of Contents for OpenScape 600










































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands