manualshive.com logo in svg

Unify OpenScape 600, User Manual

Share
Download
Unify OpenScape 600 User Manual Download Page 77

77

Ringer

Select your preferred ringer from the available audio files. If no individual audio 
files are available, the "Pattern" ringer is preset. To upload your own files in 
".mp3" or ".wav" format, please consult your administrator.

z

You can also configure this setting via the Web interface 

 page 217.

@

If nec. Press Main Menu key.

Open using the Softkey.

Open using the Softkey

if nec. 

j

Enter and confirm the User password.

Open using the Softkey

Open using the Softkey.

€

Switch to Ringtone.

Open using the Softkey 

1

. 

You will be offered the following default options:
• Pattern
• Harmonize.mp3
• Ringer1.mp3
• Ringer2.mp3
• Ringer3.mp3
• Ringer4.mp3
• Ringer5.mp3
• Ringer6.mp3

Confirm with the Softkey to switch. You will immediately hear the associated rin-
ger melody.

Save the setting with the Softkey.

Service/Settings

_

$

User:

-

_

$

Audio

-

_

Settings

-

_

Ringer

Hamronize.mp3

K

_

1. The display shows the current setting

Ringer1.mp3

ä

_

Q

_

Summary of Contents for OpenScape 600










































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands