Unify OpenScape 600 User Manual Download Page 25

Page: 25 / 233

Presence

If the access is configured as UC user on your phone (ask administrator) and you are logged on
to this server



page 209, you will see for example in the top left in the Notification area Presence

the status symbol

for Office



page 79.

To access the "Presence" menu, press the Out-of-Office / Call forwarding

key via the Soft-

keys. then you will see the following menu:

The menu has another five options.
• Break
• Sick
• On vacation
• At home
• Do not disturb

In the submenus of the options you can choose from different values for the duration



page 79.

Personal Presence via the phone is temporarily suspended with call forwarding or do not disturb.

If UC is not set up, you get a menu for variable call forwarding with the options: Variable: All calls
Variable: External Calls Variable: Internal calls.

Tuesday 27 June 2019

Favourites

Service/Settings

Conversations

Forwarding on

CFNR on

Alessandro Volta

Out-of-Office / Call forwarding

Presence

Meeting

Out of Office

Office

Lunch break

til 5.5.2017 13:00

Summary of Contents for OpenScape 600










































































































































































































































Search results

Summary of Contents for OpenScape 600

Reviews:

Brands by name

Popular brands

Unify OpenScape 600, User Manual

Search results

Summary of Contents for OpenScape 600

Reviews:

Brands by name

Popular brands