manualshive.com logo in svg

Unify OpenScape 600, User Manual

Share
Download
Unify OpenScape 600 User Manual Download Page 23

23

Different display interfaces 

Your OpenScape Desk Phone CP600/CP600E is fitted with a color/greyscale graphic display 

 page 17, in which different contents are displayed depending on the particular situation.

Conversations

The conversations list is called in the main menu with the Conversations option and is a collection 
of contact data and data from the call log. See from 

 page 31 for detailed information.

Main menu

Use the 

@

 key to access the main menu from any situation. The time, day of the week, and date, 

as well as the subscriber's own phone number, are displayed in the Notification area. The main 
menu can do much more, as can be seen from the screenshot. As the name suggests it is the start-
ing point for the entire menu tree.

Conversations

Andre-Marie Ampere

j

 

Connected call

3334

‰

 

Missed call

Daniel Bernoulli

‰

 

Missed call

49 (173) 9713

o

 

2

-

30 May

30 May

30 May

30 May

Conversations

Andre-Marie Ampere

j

 

Connected call

3334

‰

 

Missed call

Daniel Bernoulli

‰

 

Missed call

49 (173) 9713

o

 

2

-

30 May

30 May

30 May

30 May

Summary of Contents for OpenScape 600










































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands