Unify OpenScape 600 User Manual Download Page 173

Page: 173 / 233

173

Saving personal lock code

For the functions
• Locking the phone to prevent misuse



page 171

• Using a different phone in the same way as your own



page 183

in order to assign, you must enter a personal code which you can define your-
self.

If nec. Press Main Menu key.

Open using the Softkey.

Open with softkey

€

Select "PIN and license of service".

Open with softkey.

Confirm.

Request for current code.

Enter current 5-digit code.
If you have still not assigned a code, on first input use "00000".

Request for new code.

Enter the new code.

Request for repetition of the new code

Re-enter the new code.

Service/Settings

Service menu

PIN and license of ser-

Change lock code

previous code:

new code:

Please repeat:

If you have forgotten your code, contact the relevant Administrator for
help. Your PIN can be reset to "00000".

Summary of Contents for OpenScape 600










































































































































































































































Search results

Summary of Contents for OpenScape 600

Reviews:

Brands by name

Popular brands

Unify OpenScape 600, User Manual

Search results

Summary of Contents for OpenScape 600

Reviews:

Brands by name

Popular brands