Unify OpenScape 4000 User Manual Download Page 205

Page: 205 / 256

Other settings and functions

203

Activating/deactivating call forwarding

Prerequisite

: A destination has to be entered first in order to activate the for-

warding type.

Open the Presence menu.

The forwarding type "All calls" should be disabled if you want to use the call type
"Busy".

Open the Forward to menu.

Open the Forwarding controls menu.

Three types of call forwarding are offered in the Forwarding menu:
• Unconditional
• Busy
• No reply (after xs)

€µ

Select the forwarding type "Busy" for example.

Busy is deactivated.

Activate with the Softkey.

Exit the Presence menu.

Defining the ring duration before call forwarding on no
reply

You can define how long the phone should ring before "No reply (after xs)" call
forwarding activates.

Open the Presence menu.

Open the Forward to menu.

Open the Forwarding controls menu.

€µ

Select the forwarding type.

Here for instance No reply (after xs).

And open it.

€µ

Select Set delay (seconds).

All calls

¦_

Forwarding controls

Busy

336

¦ _

Busy

336

¢ _

This setting is only available if the "Server features" function was deacti-
vated by the administrator.

All calls

¦ _

Forwarding controls

No reply (after xs)

¦ _

Summary of Contents for OpenScape 4000

































































































































































































































































Search results

Summary of Contents for OpenScape 4000

Reviews:

Related manuals for OpenScape 4000

Brands by name

Popular brands

Unify OpenScape 4000, User Manual

Search results

Summary of Contents for OpenScape 4000

Reviews:

Related manuals for OpenScape 4000

Brands by name

Popular brands