Unify OpenScape 4000 User Manual Download Page 196

Page: 196 / 256

194

Other settings and functions

Displaying the date and time

You can read the date and time display here if necessary (cannot be changed).

You can also check this setting via the Web interface



page 238.

Checking the time

Press the key for the Main menu if appropriate.

Open using the Softkey.

if nec.

Enter and confirm the User password.

Open using the Softkey.

The set time is displayed.

Exit the display menu if appropriate.

Checking the date

Press the key for the Main menu if appropriate.

Open using the Softkey.

if nec.

Enter and confirm the User password.

Open using the Softkey.

The set time is displayed.

Exit the display menu if appropriate.

Settings

User settings

Date and time

Time

9:53 AM

Settings

User settings

Date and time

Date

2/6/2016

Summary of Contents for OpenScape 4000

































































































































































































































































Search results

Summary of Contents for OpenScape 4000

Reviews:

Related manuals for OpenScape 4000

Brands by name

Popular brands

Unify OpenScape 4000, User Manual

Search results

Summary of Contents for OpenScape 4000

Reviews:

Related manuals for OpenScape 4000

Brands by name

Popular brands