Unify Gigaset M2 User Manual Download Page 8

Page: 8 / 101

Safety notes

Using Gigaset M2 professional, Gigaset M2

plus

professional and Gigaset M2 Ex professional

Using the battery pack for Gigaset M2 professional
and Gigaset M2

plus

professional

Attention:

• Do not use Gigaset M2 professional und Gigaset M2

plus

pro-

fessional handsets in potentially explosive environments!

• Please observe local safety regulations when using the handset.

• The ringer, signal tones and handsfree talking (speakerphone

mode) are played over the loudspeaker. Do not hold the handset

to your ear when it rings, when a signal tone is emitted or if

speakerphone mode is switched on. Otherwise you may seri-

ously impair your hearing.

• A transmitter signal is emitted by your handset. Please observe

local safety regulations.

• Handsets can interfere with the operation of medical equip-

ment. Please observe the technical requirements of the relevant

environment (hospital, forinstance).

• The handset can cause unpleasant humming in hearing aids.

Caution:

• To avoid mutual interference, do not operate the handset in the

vicinity of electronic equipment.

• Only use the charging shell provided to charge the handset.

• If you give your handset to someone else, remember to include

the operating manual with it.

Attention:

• Do not use a standard rechargeable battery pack. This can result

in serious injury and material damage (risk of explosion, degra-

dation of battery pack cladding, functional interference and

handset damage).

• Avoid contact with fire and water.

Summary of Contents for Gigaset M2






































































































Search results

Summary of Contents for Gigaset M2

Reviews:

Related manuals for Gigaset M2

Brands by name

Popular brands

Unify Gigaset M2, User Manual

Search results

Summary of Contents for Gigaset M2

Reviews:

Related manuals for Gigaset M2

Brands by name

Popular brands