Unify Gigaset M2, User Manual, Page: 14 / 101

Step by Step
Conducting calls - the basic functions
14
Charging the battery pack
You may only use the charging shell provided for the
handset.
The handset charges when sitting in the charging shell,
even when deactivated. If the handset is active, the
charging status display flashes on the display.
If the handset deactivates because the battery pack is
flat, it automatically reactivates and is ready for opera-
tion as soon as you place it in the charging shell. The
charging operation starts. If a PIN was set, it must be
entered first to allow charging to start.
Language
If your preferred language for the display texts is not
set, you can set this yourself (

Page 30).
Dial first, then seize the line
Dialling preparation:
o
and if necessary
X
Enter the required phone no. and correct individual char-
acters as necessary using the "Delete" Display key.
Dialling:
or
Press the Talk or Speakerphone key within 30 seconds.
The station is called.
either:
p
The station answers. You are conducting a call.
or:
The station is busy or rejects the call. If configured you
are connected to the station’s mailbox.
Press the On-hook key briefly.
Call rejected