UniFlow MiCard MultiTech4, Installation & Configuration Manual

Page: 24 / 50

MiCard MultiTech4
12
3.
Enter an App Description .
4.
Click Save .
The resulting .abp file is the AppBlaster (NT-ware Edition) project file, which can
be utilized to do further modifications on the App (e.g., to add additional
transponder types).
5.
Click Create Image .
The resulting .bix file is the App (firmware file), which needs to be uploaded to the
MiCard MultiTech4.
Firmware and App cannot be read back from a reader. This allows storing secret keys
and other cryptographic functionality as part of an App. Furthermore, the possibility to
clone a device is avoided, and the intellectual property is protected.
5.1.5 Uploading the app to the card reader
1.
Attach the card reader to your computer (USB).