FORCE 50
REV. 2.2 2021-02-04
8-2
UNIFIRE FORCE 50 Robotic Nozzle
Installation and setup manual
TECHNICAL SPECIFICATIONS
8-2
F O R C E 5 0
FORCE 50 - DETAILED SPECIFICATIONS
ITEM / FEATURE
DESCRIPTION
Force 50 BLDC Robotic Nozzle
Chassis:
2” electric 24V brushless motor (BLDC) robotic
nozzle (a.k.a. “remote control monitor” or “water
cannon”) suitable for fire fighting.
Made of 316L Stainless Steel (EN1.4404).
Robust and suitable for harsh environments.
Compatible with use of foam, salt-water, and oth-
er harsh agents.
Smooth, large (50mm) pipe bends for minimal
friction loss.
Fully integrated and enclosed stainless steel
worm gears, with Bronze (CuSn12) gear wheels.
Fully enclosed BLDC brushless motors provide
extremely long life, high torque and allow ex-
tremely accurate positioning and position feed-
back.
Modular design for capability of changing dam-
aged pipe sections and gear housings.
Very low-maintenance; never requires re-greas-
ing.
Mass: Approx. 12.5 kg without nozzle tip.
Dimensions (w/ Integ nozzle):
25 x 35 x 58 cm
.
Ambient temperature range: -25°C to +70°C.
Flow Range:
500 to 2100 liters (130 to 555 U.S. gallons) per min-
ute; ;
126 m3/hr
).. Integ 50 jet/spray tip is mechan-
ically adjustable to accommodate various flows.
JETRANGE 50 tip has interchangeable flow discs
to meet your flow requirements
Max Working Pressure:
12 bar
Nominal Operating Pressure:
10 bar
Maximum Reach:
Approximately 65 meters at 2000 liters per min-
ute at 10 bars (71 yards at 530 gpm at 145 psi) in
jet stream mode. Actual results can vary signifi-
cantly depending on a number of factors (wind,
piping, valves, pump, etc.)
Maximum Range of Motion:
360° horizontal; 180° vertical (+/- 90° from hor-
izontal). Range can be easily set to any range
desired. (May be limited if used with POINTER
controller to 270° horizontal / - 20°/+ 70° or other
custom specification. Inquire to learn more.)
Movement Velocity (Speed):
Standard: 24°/sec. rotational; 12°/sec. vertical
Optional High Speed: up to 70 or 360 °/sec.
