Unified Microsystems
PO Box 133
Slinger, WI 53086
www.unifiedmicro.com
Beacon Mode
You can put message 1 in auto-repeat or beacon mode by:
1) Turn off the power.
2) Press and hold down the message 2 key.
3) Turn the power back on and then release the message 2 key.
Once the message 1 key is pressed, message 1 will continuously re-
peat until a paddle key is touched. At that point it will operate as a
normal keyer. Messages 2-4 operate normally. Pressing the message 1
key will return it to Beacon Mode.
Tune
You can place the XT-4 in a key down state for tuning with the follow-
ing procedure:
1) Press and hold the REC button.
2) Press the 2 button. The keyer will now be in the tune mode.
3) Touch either paddle key to exit tune mode.
Warranty Information
Unified Microsystems warrants the components workmanship of the
XT-4 CW Memory Keyer for a period of 1 year from the date of pur-
chase. A copy of the receipt must be included with any units returned
for warranty repairs.
Unified Microsystems will, at its option, repair or replace defective
units returned during the warranty period.
Unified Microsystems reserves the right to change specifications of
the XT-4 at any time without notice.
UM
XT-4 CW Memory Keyer
Unified Microsystems
PO Box 133
Slinger, WI 53086
www.unifiedmicro.com
Unified
Microsystems
User’s Manual
Revision 1.07
