10
10
10
10
800-621-8560
necessary when ordering replacement parts or requesting warranty
service.
8. Confirm that the unit is holding temperature. Set control to desired
temperature for your particular ambient and altitude.
9. Allow your unit to operate for approximately 2 hours before putting in
product to allow interior of unit to heat to storage temperature.
NOTE: All motors are oiled and sealed.
NOTE: FAILURE TO FOLLOW INSTALLATION GUIDELINES AND
RECOMMENDATIONS MAY VOID THE WARRANTY ON YOUR UNIT.
ELECTRICAL SUPPLY:
The wiring should be done by a qualified electrician in
accordance with local electrical codes. A properly wired and grounded outlet will
assure proper operation. Please consult the data tag attached to the compressor
to ascertain the correct electrical requirements. Supply voltage and amperage
requirements are located on the serial number tag located inside the unit on the left
interior side wall.
