![background image](http://html.mh-extra.com/html/uniden/wnp1000/wnp1000_owners-manual_3832404005.webp)
9
c) Connect the computer directly to the
WNP1000
Wireless AP
using a “crossover” Ethernet cable.
If you wish to setup the
WNP1000 Wireless AP
by using an
802.11b enabled PC, make sure the 802.11b client is in
“Infrastructure” mode, and has an SSID of “UNIDEN” or blank.
The default IP address of the
WNP1000 Wireless AP
LAN
interface is 192.168.1.10 and the default network mask
255.255.255.0.
The Configuration Interface
The
WNP1000 Wireless AP
incorporates a browser-based
management/configuration interface. The following sections
guide you through configuring your
WNP1000 Wireless AP
and
detailing the information found within each section.
Logging In
Open a web browser on your computer configured for TCP/IP
networking. Make sure that the computer and the
WNP1000
Wireless AP
are on the same local area
network, with similar IP addresses. (If you are having
trouble communicating with your Access Point, please
see “Troubleshooting” on page 37.)
10
1. Type
“http://192.168.1.10/”
into the
Location field
(or the URL field) at the top of the browser window
and hit the
Enter
key. This is the same location were
you type in the web address such as
http://www.uniden.com. (
192.168.1.10
is the default
IP address of the
WNP1000
Wireless AP
.)
Once you hit the
Enter
key, the
“Enter Network
Password”
window will appear.
2. Type
“admin”
(lower case) in the
User Name
field,
leave the
Password
field blank, and click
OK
.
The
General Information
web page will appear next.
3. After you are logged into the Access Point you can
change the User Name and Password.
Summary of Contents for WNP1000
Page 16: ...31 32...
Page 29: ...57 MEMO 58...