Uniden UM455 Page 63 Owner'S Manual Download

Page: 63 / 68

Specifications

NMEA Operation

NMEA Input

If you have difficulty getting the UM455 to receive data from your GPS receiver,

check the device’s configuration. It should be set to the parameters shown in the

table below.

Table 12 - NMEA Input Parameters

Baud rate

4800 bps

Data bits

Parity

None

Stop bits

Data amplitude

Over 2.0 V

Drive capability

Over 10 mA

The radio supports RMC, GLL, GNS, GGA

and ZDA sentences. When these sentences

are received, the radio displays latitude/

longitude, date, time, course, and speed.

If any sentence except an RMC or GLL

sentence is received, the radio uses the

information based on the following priority

order.

•

Status:RMC > GLL > GNS > GGA

•

Latitude/Longitude:RMC > GLL > GNS > GGA

•

UTC Time: RMC > GLL > GNS > GGA > ZDA

•

Date: RMC > ZDA

•

Speed / Course:RMC

NOTES :

•

If the radio receives only a GLL sentence, the radio does not display the current

speed, course, and date.

•

If the radio receives both RMC and GLL sentences, the radio uses only the RMC

sentence.

•

Status data is used to check whether the GPS data is valid or invalid.

NMEA Output

When the radio receives a DSC call (Distress, Position Reply, or Position Send), it

outputs a DSC/DSE sentence from the NMEA output port.
NOTE: When the radio receives a distress call, it outputs a sentence in the following

format.

•

$CDDSC,12,3081234000,,07,00,0354013946,0657,,,S,E*6D

•

$CDDSE,1,1,A,3081234000,00,60875646*13

Table 11 - Canadian Channel Frequencies and Channel Tag

(cont'd)

This radio supports NMEA0183 version 4.10.

Summary of Contents for UM455





































































Search results

Summary of Contents for UM455

Reviews:

Related manuals for UM455

Brands by name

Popular brands

Uniden UM455, Owner'S Manual

Search results

Summary of Contents for UM455

Reviews:

Related manuals for UM455

Brands by name

Popular brands