Uniden UM455 Page 51 Owner'S Manual Download

Page: 51 / 68

Maintenance and Troubleshooting

Maintenance and Troubleshooting

Due to its rugged design, the UM455 requires very little maintenance. However, it is

a precision electronic instrument, so you should follow a few precautions:

•

If the antenna has been damaged, you should not transmit except in the case of an

emergency. A defective antenna may cause damage to your radio.

•

You should arrange for periodic performance checks with your Uniden dealer.

Common questions

Problem

Things to Try

The radio won’t power on.

Check the power connections.

Check the fuse.

Check the master battery switch and branch

circuit that connect to the radio.

The radio won’t transmit.

Make sure you are not in scan mode.

Make sure you are not trying to transmit on a

receive-only channel (see the channels and

frequency tables starting on page 57).

Make sure you are transmitting at the correct

power level for this channel (see the channels and

frequency tables starting on page 57).

Make sure the duration of each transmission is

less than 5 minutes.

Noise comes out of the

speaker all the time

Adjust the squelch level; it is probably too low.

I can’t hear anything (no vol-

ume) from the speaker.

Adjust the squelch level; it is probably too high.

I can transmit, but no one can

hear me.

Check your UIC channel settings (see Setting the

UIC channel mode (USA/CAN/INT) on page 12).

I can’t read the display.

Adjust the contrast and backlight brightness level

(see page 22)

The display is too bright at

night.

Adjust the backlight brightness level.

(see page 22)

I can’t see any words on the

display.

Reset the radio back to the default contrast level:

turn off the radio; hold the menu key and turn it

back on.

Summary of Contents for UM455





































































Search results

Summary of Contents for UM455

Reviews:

Related manuals for UM455

Brands by name

Popular brands

Uniden UM455, Owner'S Manual

Search results

Summary of Contents for UM455

Reviews:

Related manuals for UM455

Brands by name

Popular brands