Uniden HomePatrol-2, Owner'S Manual, Page: 14 / 46

HomePatrol-2 operates on a single profile at a Sme, so, if you want to significantly change your current
profile, save it to SenSnel first. The saved profile becomes a snapshot of your HomePatrol-2
configuraSon at that moment. When you want to restore that specific profile later, write it back to
HomePatrol-2. For example, if you are traveling to another city and you will be creaSng a profile for that
city, write your current profile to SenSnel. You can restore that profile when you return and all your
se]ngs will be saved.
Refer to HomePatrol-2 SenSnel Sodware Help files for detailed informaSon about profiles.
Updating HomePatrol-2 Firmware
From Sme to Sme, Uniden will release firmware updates to improve exisSng funcSonality, add new
features, or address issues found in its operaSon. UpdaSng the firmware takes just a few minutes and is
easily accomplished using the HomePatrol SenSnel Sodware you installed on your PC at HomePatrol-2
iniSalizaSon. If you did not install SenSnel sodware, refer to the
HomePatrol-2 and SenAnel secSon later
in this manual.
Simply connect your HomePatrol-2 to your PC using the supplied USB cable and select “Mass Storage”.
Then, in SenSnel select
UPDATE
!
Update Firmware
and follow the on-screen prompts.
Updating the HomePatrol-2 Database
To update the HomePatrol-2’s database, connect it to your PC using the supplied USB cable. If you have
upgraded to the extreme features, then select “Mass Storage”. Then, in SenSnel select
UPDATE
!
Update Master HPDB
. Finally, write the new database to your HomePatrol-2 by selecSng
HomePatrol
!
Write to Homepatrol.
6