GMR4040-2CKHS
GMR4099-2CKHS
CHARGE
14
15
16
17
18
13
25
26
22
23
24
27
LIQUID CRYSTAL DISPLAY
CHARGING CRADLE
*Range may vary depending on environmental and/or topographical conditions.
• 15 GMRS / 7 FRS Channels
• 7 Weather Channels
• 121 Sub Codes
(CTCSS Tone and DCS Code)
• Up to 40 Mile Range*
• Internal VOX Circuitry
• 10 Selectable Call Tone Alerts
• Backlit LCD Display
• Headset Jack
• 2 headset boom mics
• Vibrate Call Alert
• Roger Beep
• Power Boost PTT
• 2 Belt Clips
• 2 Carabiner Clips (GMR4099-
2CKHS only
1 Antenna
2 PTT (Push-To-Talk) Button
3 Boost Button
4 Menu/Power Key
5 Channel Up/Down Key
6 Weather/Monitor Key
7 Speaker
8 Headset Jack/Mini USB
9 Volume Up/Down Key
10 Microphone
11 Battery Level Meter
12 Receive Indicator
13 Call Indicator
14 Boost Indicator
15 Scan Indicator
16 Channel Indicator
17 Hi Power Indicator
18 Low Power Indicator
19 Transmit Indicator
20 Volume Setting Indicator
21 Vibrate Indicator
22 Keypad Lock Indicator
23 VOX Indicator
24 Weather Indicator
25 Alert Indicator
26 Sub Code Indicator
27 Charging Contacts
Congratulations on your purchase of a Uniden
GMRS (General Mobile Radio Service) radio.
These lightweight, palm-sized radios are state-of-
the-art devices. Both have many top features. The
GMR4040-2CKHS and GMR4099-2CKHS include
two headset boom mics. JIS2 compliant. Use them
at outdoor and sporting events, to contact family
and friends, hiking, skiing, outdoors, or in a
neighborhood watch for vital communication.
PACKAGE CONTENTS
Your package contains two radios, two rechargeable
NiMH battery packs, one charging cradle, two headset
boom mics, two belt clips, two Carabiner Clips
(GMR4099-2CKHS only), and this reference guide. A
NiMH battery pack or 3 AAA alkaline batteries (not
included) power each unit. To order the following
optional accessories, visit our web site at www.
uniden.com or call 1-800-554-3988 during regular
business hours.
Use only Uniden accessories.
• NiMH Battery Pack - #BT-1029 or BP-1029
• Charging Cradle - #RC-1288
• Headset Boom Mic - #ZA-133 or ZA-160
• AC Adapter - #AD-0001
• Mini USB Cable - #BWZG1666001
• Carabiner Clip - #TSTD0720002
GMRS LICENSE
The radio operates on the General Mobile Radio
Service (GMRS) frequencies when using
Channels 1-7 and channels 15-22. You must
have a GMRS license issued by the Federal
Communications Commission to legally use
these channels. For licensing information and
application forms, visit the FCC online at: www.
fcc.gov/wtb/uls or call the FCC hotline at
1-800-418-3676. If you have any questions, you
can contact the FCC direct at 1-888-225-5322.
No license is required for operation on channels
8-14 or operation on any channel in Canada.
INSTALL THE BATTERY
Each radio uses a supplied NiMH battery pack or
3 AAA alkaline batteries (not included).
To install the NiMH battery pack:
1) Make sure your radio is OFF.
2) Press the tab at the bottom of the battery
compartment door to remove the cover.
3) Install the NiMH battery pack into the battery
compartment. Be certain to follow the
instructions written on the label on the battery
pack. Installing the battery pack incorrectly will
prevent the unit from operating.
4) Replace the battery compartment door.
USING THE RADIO
• NiMH battery pack
• Battery Charger
• Mini USB Charging Port
• 10 Hours Battery Life
• Battery Level Meter
• Channel Monitor
• Channel Scan
• NOAA Emergency /
Weather Channels with
ALERT
• Camo Pattern
(GMR4099-2CKHS only)
• Weather Resistant (JIS2)
BATTERY LEVEL AND LOW
BATTERY ALERT
This unit has a battery level meter on the display to
indicate the status of the batteries. When the
battery in the unit is low, the battery level meter
icon
flashes. Recharge the NiMH battery
pack immediately or if you are using alkaline
batteries, you must replace the alkaline batteries in
order to continue using the radio.
Warning! To avoid the risk of personal injury or
property damage from fire or electrical shock, only
use the Uniden accessories specifically designated
for this product.
GMR4040-2CKHS, GMR4099-2CKHS RADIO
CHARGING THE RADIO
If you use the rechargeable NiMH battery pack, two
radios can be charged directly or by using the
supplied charging cradle.
USING The RadIo
1) Connect an optional Mini USB cable
(#BWZG1666001) to the radio Mini USB port and
the other end to a computer or to an AC or DC
adapter that provides USB charging power (NOT
to a USB hub).
2) Charge the battery pack for 16 hours until the
battery indicator stops flashing.
USING The ChaRGING CRadle
1) Connect the AC adapter (#AD-0001) to DC 9V
jack and to a standard 120V AC wall outlet.
2) Set the charging cradle on the desk or tabletop,
and place the radio in the charging cradle with
the keypad facing forward.
3) Make sure that the LED illuminates. Charge the
battery pack for 16 hours and remove the radio
from the charging cradle after charging.
Note:
• Use the optional Mini USB cable #BWZG1666001
accessory from Uniden to connect to an AC or
DC adapter that provides USB charging power
(NOT to a USB hub).
• Use only the supplied battery and AC adapter or
approved accessories from Uniden.
• Charge time may vary depending on the battery
life remaining.
• Do not recharge alkaline batteries. Doing so can
create a safety hazard or damage the radio.
• For fastest charging, turn off the radio before
charging.
• The battery must be installed for the unit to
operate, even if the unit is also connected to
external power.
• If battery power is low, you cannot operate the
radio even using external power. Allow the
batteries to charge before using. If you try to
transmit while power is low, the radio will
In order to get the most out of your new radio, read
this reference guide completely before attempting to
operate the unit.
TURNING The RadIo oN aNd
adjUSTING The VolUMe
1) Press and hold
MENU/
to turn the radio ON,
and increase the speaker volume by pressing
VOL
▲
. To decrease the volume, press
VOL
▼
.
2) Press and hold
MENU/
again to turn the radio
OFF.
adjUSTING The SoUNd (KeY BeepS)
Your radio emits a beep each time one of the keys
(except for the
PTT
and
CALL/LOCK
) is pressed.
To turn this sound OFF, press and hold
CALL/
LOCK
while turning ON the radio. Repeat this step
to turn the sound ON.
ChooSING a ChaNNel
Your radio has 22 channels and 121 Sub codes you
can use to talk to others. In order to speak to
someone, each of you must be set to the same
channel and Sub code.
To choose a channel:
With the radio in "Normal" operating mode, press the
CH
▲
/
CH
▼
key to increase or decrease the
channel number displayed.
Note:
Channels 1-7 have a typical range of up to 40
miles. Channels 8-14 have a typical range of up to
5 miles. Channels 15-22 have a typical range of up
to 40 miles. You can see which GMRS or FRS
channel is active by the icon. The
hi
icon is
displayed while scanning GMRS channels, and the
lo
icon is displayed while scanning FRS channels.
TalKING oN YoUR RadIo
To talk to others using the radio:
1) Press and hold the
PTT
button and speak in a
clear, normal voice about 2-3 inches away from
the microphone. While you are transmitting, the
icon appears on the display. To avoid cutting
off the first part of your transmission, pause
slightly after pressing the
PTT
button before you
start talking.
2) When you have finished speaking, release the
PTT
button. You can now receive incoming
calls. While receiving,
displays.
MoNIToR Mode FeaTURe
Your radio allows you to listen for weak signals on
the current channel at the press of a key.
To turn ON Monitor mode:
• Press and hold
WX/MON
for 2 seconds until two
beeps sound. The receiver circuit stays open,
and both noise and weak signals can be heard.
To turn OFF Monitor mode:
• Press and hold
WX/MON
for 2 seconds to return
to "Normal" mode; the
icon stops blinking
and disappears.
adVaNCed FUNCTIoNS (MeNUS)
Use
MENU/
to access your radio's advanced
functions.
Normal
Sub Code
Scan
Silent
VOX
Level
Call
Tone
WX
Alert
Normal
OFF, 1-121 ON/OFF
ON/OFF
OFF,
1-5
1-10
ON/OFF
1) Press
MENU/
to enter the menus.
2) Additional presses of
MENU/
advance you
through the menus until exiting to "Normal"
operating mode.
3) Other methods of exiting the Menu function are:
a. Press and hold
MENU/
again.
b. Press any key except
CH
▲
/
CH
▼
or
VOL
▲
/
VOL
▼
and wait 10 seconds until the unit
returns to “Normal” mode.
Sub Code
Each of the channels 1-22 may have any one of
the codes, OFF, or 1-121 selected. Code
oF (OFF)
indicates no Sub code selected and your radio can
receive a signal regardless of the code settings of
the transmitting radio.
1) Press
MENU/
to enter
Menu
mode. The
subcode indicator flashes.
2) Press
CH
▲
/
CH
▼
key to increase or
decrease the code number displayed. You can
also select
oF (OFF) at this stage.
3) Press
MENU/
to exit Menu mode.
4) Press any key other than
CH
▲
/
CH
▼
or
VOL
▲
/
VOL
▼
and the radio returns to Idle mode
in 10 seconds.
Scan
Your radio has a channel scan feature that allows
you to easily scan all 22 channels. When an active
channel is detected, the radio pauses on that
channel until the channel is clear. Then, after a 2
second delay, the radio continues scanning.
Pressing the
PTT
button while the scan is paused
on a channel allows you to transmit on that
channel.
To turn OFF the silent mode:
1) Press
CH
▼
to display
oF.
2) To exit the Menu, press the
MENU/
key
advance you through the Menu until exiting to
"Normal" mode.
vibe disappears.
Note:
To prevent unwanted silent alerts, be sure to
use a Privacy code whenever you use the Silent
mode feature. You can hear the received voice when
you turn on channel scan and an active channel is
detected even during silent mode.
Missed Call Alerts
If you receive an incoming call while silent mode is on
and do not respond, the radio will turn on the Missed
Call icon.
The radio will additionally remind you of a missed call
by vibrating every minute after the call for 3 minutes.
KeY loCK
To lock the keypad:
1) Press and hold
CALL/LOCK
; displays.
These functions are not affected by Key Lock:
• Volume adjust
• Call tone transmission
• Enter monitor mode
• PTT transmission
• Power off
To unlock the keypad:
Press and hold
CALL/LOCK
again; disappears.
aUToMaTIC poWeR SaVe
Your radio has a circuit designed to dramatically
extend the life of the batteries. If there is no
transmission or an incoming call within 3 seconds,
your radio switches to Power Save mode. The radio
is still able to receive transmissions in this mode.
lCd BaCKlIGhT
The LCD Backlight automatically turns ON when any
key (except the
PTT
button) is pressed. The LCD
display illuminates for 10 seconds before turning
OFF.
RoGeR Beep
Roger Beep is a BEEP that is sent to notify the end of
transmission (both PTT and VOX transmission).
Roger Beep can be heard through the speaker when
both Roger Beep and Key Beep are set to ON. When
Roger Beep is set to ON and Key Beep is set to OFF,
Roger Beep will not be heard from the speaker but it
will be transmitted to your party. When Roger Beep is
set to OFF, Roger Beep will neither be heard nor
transmitted.
To change Roger Beep setting:
Press and hold
VOL
▲
while turning the radio on and
off. If Roger Beep is ON, it will be turned off; if it is
OFF, it will be turned on.
automatically turn off.
To turn ON channel scan:
1) Press
MENU/
repeatedly until the
scan... icon
and
oF blink.
2. Press
CH
▲
/
CH
▼
to select Scan mode and
press
MENU/
to start it.
To turn OFF channel scan:
1) Press
MENU/
with the scan setting of
oF.
2) Press any key other than
CH
▲
/
CH
▼
or
VOL
▲
/
VOL
▼
to turn channel scan off in 10
seconds.
Voice Operated Transmission
Your radio is equipped with a user selectable Voice
Operated Transmitter (VOX) that can be used for
automatic voice transmissions. The VOX feature is
designed to be used with a headset with a
microphone. Transmission is initiated by speaking
into the microphone instead of pressing
PTT
.
To select VOX level:
1) Press
MENU/
repeatedly until the
vox icon
and the VOX sensitivity level (
OFF
,
1-5
) blink.
2) Press
CH
▲
/
CH
▼
to change the VOX
sensitivity levels. Use level 1 for increased
sensitivity to voice in normally quiet environments,
and use a higher level to reduce undesired
activation in very noisy environments.
Call Tone
Your radio is equipped with 10 selectable call tones
that are transmitted when
CALL/LOCK
is pressed.
To select a call tone:
1) Press
MENU/
repeatedly until the
CALL
icon
and
Call Tone
start to blink on the display.
2) Press
CH
▲
/
CH
▼
to move through the
available call tones. Each tone will be heard
through the speaker but will not be transmitted.
Cycle through these tones and stay on the tone
you want to select.
3) Exit Call Tone to set the selected tone.
Setting Silent Mode
When you turn on the silent mode, all incoming
calls are muted: the radio flashes the display
backlight, the channel indicator,
vibe and call to
alert you to an incoming call. If you do not respond
to the call within 15 seconds, the backlight turns off.
The radio will also vibrate to remind you that you
missed a call. Silent mode is disabled for 15
seconds when you transmit, receive, or press any
other button.
Press
MENU/
repeatedly until the
vibe icon and
the current setting start to blink on the display.
To turn ON the silent mode:
1) Press
CH
▲
to display on.
2) To exit the Menu, press the
MENU/
key
advance you through the Menu until exiting to
"Normal" mode.
vibe appears.
USING A HEADSET
You can use a headset (#ZA-133 or ZA-160) for
more private communications. To use a headset,
lift the rubber cover from over the headset jack,
then plug in the headset.
Important:
Your radio is not weather resistant
when using a headset jack. When you remove the
headset, be sure to fully press the jack cover into
place to restore its weather resistant capability.
U01UT064ZZA(0)
English
