Avoid electrical cables, pipes, or other items behind the
mounting location that could cause a hazard when inserting
screws into the wall.
Mount your phone within distance of a working phone jack.
Make sure the wall material is capable of supporting the weight
of the base and handset.
Use screws with anchoring devices suitable for the wall material
where the base unit will be placed.
Be sure the wall is capable of supporting the weight of the
phone, and use the proper type of anchoring device for the wall
material.
Insert two #10 screws (minimum length of 35mm, not supplied)
into the wall, 100mm vertically apart.
Leave the screw heads 3mm away from the wall to allow room
for mounting the phone.
Align the mounting slots over the screws and slide the base
down into place.
To mount the telephone on a wall, first slot the Wall Mount Bracket
into the two Mounting Bracket Location Slots at the back of the base.
On the base front, slide the handset hook out of the slot. Rotate hook
180° and flip it from front to back. Slide it back into the slot. It should
extend slightly; this extension fits into a slot on the handset.
•
•
•
•
•
•
•
•
MOUNTING THE PHONE ON THE WALL
Battery
Compartment
Ringer volume
switch
LOCATION OF CONTROLS (cont’d)
Mounting
Bracket
location slots
AC adaptor jack
Telephone line jack
Ringer pitch
switch
Before doing this, consider the following:
7
