English - 1
Multihandset Features
To use the features in this section, you need at least 2
handsets.
Your base supports a total of 12 cordless handsets: the one that
came with the base and up to 11 accessory handsets. Your base also
supports a total of 2 DRX100 range extenders, including any that
came with your phone.
You must register accessory handsets to the base before using them.
(Handsets that came packaged with the base are already registered.)
Handsets that aren’t registered display a
Not Registered
message.
For registration instructions, see p. 24, or see the accessory handset
manual.
If a handset was ever registered to a base, you must reset it before
it can register to a new base; see p. 24, or see the accessory handset
manual.
Conference Calling
When an outside call comes in, four handsets can join in a
conference call with the outside caller.
To join a call that’s already in progress, just press
Talk
or
sPEakER
.
To leave the conference call, hang up normally; the other handset
remains connected to the call.
Call Transfer
To...
Press...
transfer a call
inTERcOM/clEaR
. The phone puts the call on hold and
prompts you to select the handset you want to page.
When the other handset accepts the call, you'll be
disconnected (press
Talk
to rejoin the call).
cancel a transfer
Talk
to return to the call.
accept a
transferred call
inTERcOM/clEaR
to answer the page and speak to the other
handset. Then, press
Talk
to speak to the caller.
Privacy Mode
To activate privacy mode on a call in progress, press
MEnu/sElEcT
twice. As long as privacy mode is on, you'll see a in the display,
and no other handsets can join your call. Privacy mode turns off
♦
♦
♦
♦
♦
♦
♦
