file:///C|/Documents%20and%20Settings/POpitz/My%20Documents/temp/UnidenManBeta/AvailableOperationModes.html
In Weather Priority mode, the scanner interrupts scanning every 5 seconds to check for
an alert. If an alert tone is present, the scanner sounds an alert tone, then stays on the
weather channel so you can hear the alert. For more information about Weather Priority
Mode, see
To enter Weather Priority mode on the
FU tap WX.
To enter Weather Priority mode on the
, tap WX.
To enter Weather Priority mode on the
, FU tap GPS/
WX.
Weather Alert mode
This is similar to Weather mode: the scanner checks each of the 10 National Weather
Radio channels and stays on a channel when it detects a signal. However, in Weather
Alert mode, the scanner only opens squelch if it detects the EAS alert tone. For more
information about Weather Alert Mode, see
.
To enter Weather Alert mode on the
1. Enter Weather mode.
2. F tap WX.
To enter Weather Alert mode on the
:
1. Enter Weather mode.
2. Tap WX .
To enter Weather Alert mode on the
1. Enter Weather mode.
2. FU tap GPS/WX.
Tone Out mode
file:///C|/Documents%20and%20Settings/POpitz/My%20Documents/temp/UnidenManBeta/AvailableOperationModes.html (7 of 8)4/7/2009 10:08:47 AM
