file:///C|/Documents%20and%20Settings/POpitz/My%20Documents/temp/UnidenManBeta/AvailableOperationModes.html
Close Call Priority mode
In Close Call Priority, the scanner interrupts its current operation every 2 seconds,
searches for signals that are stronger than other signals on the selected band, then returns
to the previous operation. When it detects a close call hit, the scanner can switch to the
channel and open squelch (depending on the setting). In Close Call DND (do-not-
disturb) mode, the scanner only interrupts if it is not already receiving audio.
For more information about key operation and other specifics about Close Call mode:
●
Handheld Scanner Close Call Mode
●
●
To enter Close Call mode on the
, FUNCTION
+ repeatedly tap HOLD until Close Call Pri appears.
To enter Close Call mode on the
, repeatedly tap the SQ knob
until Close Call Pri appears.
To enter Close Call mode on the
, Fu repeatedly tap the
SQ knob until Close Call Pri appears.
The Close Call icon appears for Close Call Priority mode and is in reverse
colors for Close Call DND mode.
Close Call Only mode
The scanner stops the current operation and only performs Close Call checks as
described above.
For more information about key operation and other specifics about Close Call Only
mode:
●
Handheld Scanner Close Call Only Mode
●
●
file:///C|/Documents%20and%20Settings/POpitz/My%20Documents/temp/UnidenManBeta/AvailableOperationModes.html (3 of 8)4/7/2009 10:08:47 AM
