file:///C|/Documents%20and%20Settings/POpitz/My%20Documents/temp/UnidenManBeta/AvailableOperationModes.html
●
To enter Scan mode, tap SCAN. (This is the default mode when the
scanner powers on.)
Search mode
The scanner checks each frequency that falls within a user-programmed range. For
trunked systems, it checks each control channel in the user-programmed list. When it
detects a signal, the scanner stays on the channel and opens squelch. For trunked
systems, when it detects an active Talk Group ID, the scanner switches to the audio
channel and opens squelch. When the signal stops, the scanner continues the search.
For information about key operation and other specifics about Scan Mode:
●
●
●
To enter Search mode, F tap SCAN . The scanner asks if you
want to perform the Quick Search: tap YES if this is the search you want.
To start a different search, tap NO: the scanner takes you to the
menu, and you can select your search.
Hold mode
The scanner stays on the current channel and enables save and edit options (options vary
depending on the type of system).
For more information about key operation and other specifics about hold mode:
●
●
●
●
To enter Hold mode, tap HOLD.
file:///C|/Documents%20and%20Settings/POpitz/My%20Documents/temp/UnidenManBeta/AvailableOperationModes.html (2 of 8)4/7/2009 10:08:47 AM
