Friday, November 07, 2008
53
Set Longi tude
00. 000000 W
Set Longitude
Press the number keys to enter longitude data. Press any number key when the cursor is in the last
position to toggle between east longitude (E) and west longitude (W).
Press [E / yes / gps] to accept and return to the previous menu.
If
͞
DMS:DDD
ʹ
MM
͛
SS.ss
͟
is selected in
Set Pos Format
, the display is the following.
If
͞
DEG:DDD.dddddd
͟
is selected in
Set Pos Format
, the display is the following.
Set Range
In this menu, the setting unit is determined by the setting in
Set Unit
.
When you select
͞
mile
͟
in
Set Unit
, the displayed unit will be mile.
When you select
͞
km
͟
in
Set Unit
, the displayed unit will be km.
The valid setting range is from 0.5 to 125.0, in 0.5 steps.
Press [E / yes / gps] to accept the setting and return to the previous menu.
Set GPS Enable
When this option is set to
͞
On
͟
, the scanner will control L/O status of this site by position information
received from a GPS.
On
The L/O state of this site is automatically controlled by position information.
Off
The L/O state of this site is not influenced by GPS.
Press [E / yes / gps] to accept and return to the previous menu.
Set Longi tude
00
䈬
¶
W