40
41
Using Special Features
Answering an intercom page
When.the.intercom.page.tone.sounds,.the.display.will.show.the.ID.of.the.handset.that.is.paging.
Press.
TALK/FLASH
.or.
CLEAr/iNT’CoM
.
Note:..If.AutoTalk.is.on,.the.handset.will.automatically.answer.the.page.when.you.pick.up.the.handset.from.the.
cradle..If.Any.Key.Answer.is.on,.you.can.also.press.any.key.on.the.handset’s.dial.pad.
To.hang.up.an.intercom.call,.press.
END
.
Muting the Microphone
Mute.turns.off.the.microphone.so.the.caller.can’t.hear.you..This.only.works.while.you.are.on.a.call..
Press.
/MUTE
..
Mute On
.and. .appear.in.the.display;. .remains.while.muting.is.on.
To.cancel.muting,.press.
/MUTE
.again..
Mute Off
.appears.
Tone Dialing Switch Over
If.your.phone.is.set.to.pulse.dialing,.you.can.temporarily.switch.to.tone.dialing.after.the.call.connects..This.feature.
is.useful.when.you.need.tone.dialing.to.use.automated.menu.systems,.such.as.telephone.bank.tellers,.telephone.
prescription refills, customer support menus, etc. Make your call normally. Once your call connects, press
/ToNE
.
on.the.handset..Any.digits.you.enter.from.then.on.will.be.sent.with.tone.dialing..When.this.particular.call.ends,.the.
phone.automatically.returns.to.pulse.dialing.
See.Changing.the.dial.mode.on.page.1.for.instructions.on.setting.your.phone.for.pulse.or.tone.dialing.
1)
)
1)
)
