Deleting CID Records
• To delete the record shown in the display, press the
DELETE
button once.
• To delete all records while reviewing, press and hold the
DELETE
button for
about three seconds. The screen displays
DELETE ALL?
. Press
DELETE
again to complete.
Dialing Back
When reviewing Caller ID records, you can dial back the numbers on the display
by pressing the dial button.
Note: If
PICKUP PHONE
shows in the display, no other changes to
the number can be made. The information sent from the telephone
company is known to be a valid number for dialing back (used only
in very limited areas). Once you pickup the phone, the number is
automatically dialed.
If You Programmed Your Local Area Code
1. Use the
SKIP
or
REPEAT
buttons to display the number you want to dial.
2. Press the
DIAL
button.
• If you see a number with seven digits (i.e. 555-1234), then the call is from within
your area code. However, this does not guarantee the call is a local call.
• If you see a number with 11 digits (i.e. 1-234-555-1234), then the call is not from
within your area code.
Note: A timer (10 seconds on-hook and 3 seconds off-hook) located
in the upper right side of the display will start, letting you know how
much time is left until the unit returns to the Summary Screen.
