Page 35
Version 3.3 / November 2016
3.4.18 RIElDA lock set
Locks type RIELDA allow you to program the lock to the correct set of keys, what makes it possible to
use one working key for multiple locks RIELDA and easily change the combination of the lock under the
new working key with loss, theft or damage to the old key.
The lock comes complete with three keys (see. figure 75):
- one master key - GOLDEN key is used only for the lock programming;
- two operating SILVER key - used for opening / closing machine door.
Fig. 74
The lock can be located in two positions:
• operating position (‘‘closed’’ position - see figure 74);
• position for the programming (the ‘‘open’’ position - see figure 74);
The machine is supplied with pre-programmed lock. To open / close the door machine, insert the operat-
ing SILVER
(see figure 75) key lock and turn it in the lock 90 degrees to the right to marry (see figure 74).
WARNING! Programming lock operations must be performed only when the machine door is
open! Otherwise, there will be lock (lock) the door latch.
WARNING! Return the switch to the programming can only be the master key to which the
lock has been programmed the last time!
Control risk
Closed
Open/programming
90
0
Master key
Working keys
Fig. 75
